Click image to view full size image
Soft & Hard Wood Cutting Circular Saw Blades Low Noise 355 x 5.0 x 3.7 x 70P In Good Sharpness
Application:
- Fine cross cutting blades. Suitable for cross cutting softwood, hardwood, plywood, chip-board, multi-board, panels, MDF, plated & counted-plated panels, laminate & Bi-laminate, plastic and FRP.
- Providing a high degree of finish edge. Also can rip cut along the grain. Fit to sizing saws, table saws, crosscut saws.
- Bore: Available all size and kind upon request, such as 5/8", 1", 20mm, 22.23mm, 25mm, 30mm, 35mm, etc.
- Teeth: Teeth number could be adjusted upon request.
- Hook angle: could be adjusted upon request
Specifications:
355x5.0x3.7x70P
Other sizes are as below:
| CODE | Diameter (mm) | Keef,B/b | Teeth Numbe |
| YYWEF 150 | 150 | 2.4/1.6,2.6/1.6 | 48,50,60 |
| YYWEF 180 | 180 | 2.6/1.8,2.8/1.8 | 56,60,72 |
| YYWEF 200 | 200 | 2.6/1.8,2.8/1.8 | 64,68,80 |
| YYWEF 230 | 230 | 2.6/1.8,2.8/1.8 | 72,76,92 |
| YYWEF 250 | 250 | 2.8/2.0,3.0/2.0 | 80,100,120 |
| YYWEF 270 | 270 | 2.8/2.0,3.0/2.0 | 80,100,120 |
| YYWEF 300 | 300 | 3.0/2.2,3.2/2.2 | 96,100,120,140 |
| YYWEF 330 | 330 | 3.0/2.2,3.2/2.2 | 96,100,120,140 |
| YYWEF 350 | 350 | 3.0/2.2,3.2/2.2 | 100,108,112,116,120 |
| YYWEF 400 | 400 | 3.2/2.2,3.5/2.5 | 100,120,128,132,140 |
| YYWEF 450 | 450 | 3.2/2.2,3.5/2.5 | 100,120,128,132,140 |
| YYWEF 500 | 500 | 3.5/2.5,3.6/2.8 | 100,120,128,132,140 |
| YYWEF 550 | 550 | 3.8/2.8,3.6/2.8 | 100,120,128,132,140 |
| YYWEF 600 | 600 | 4.0/3.0 | 100,120,128,132,140 |
| YYWEF 650 | 650 | 4.0/3.0 | 100,120,128,132,140 |
| YYWEF 700 | 700 | 4.2/3.2 | 100,120,128,132,140 |
| YYWEF 750 | 750 | 4.2/3.2,4.6/3.6 | 100,120,128,132,140 |
| Remark | Other specifications & sizes are available upon request | ||
Advantages:
- Using SKS (imported from Japan) steel plate with Ceratizit Tips(imported
355mm Wood Cutting Blades , Radial Arm Saw Blades For Cross Cutting Softwood
